berex b c t05cv http: //www.berex.com 5-4000 mhz wideband drive amplifier device features ? 43.5 dbm output ip3 at 9dbm/tone ? 22 db gain at 900mhz ? 24 dbm p1db at 2450 mhz ? highly reliable ingap/gaas hbt technology ? application: commercial wireless system target device performance (t a = 25 c) symbols parameters test co nditions min typ max unit gain 900mhz 1900mhz 2450mhz 20.7 16.6 14.3 21.7 17.6 15.3 22.7 18.6 16.3 db s11 900mhz 1900mhz 2450mhz -18.6 -15.3 -17.2 db s22 900mhz 1900mhz 2450mhz -15.1 -39.7 -15.3 db oip3 900mhz 1900mhz 2450mhz 41.6 41.3 39.7 43.6 42.3 40.7 dbm p1db 900mhz 1900mhz 2450mhz 23.0 22.8 23.2 24.0 23.8 24.2 dbm is-95 ch power @-45dbc acpr 900mhz 1900mhz 2450mhz 16.0 16.0 16.5 dbm nf 900mhz 1900mhz 2450mhz 4.4 4.2 4.3 db ic vc = 5.0v 77 87 97 ma vc 5.0 v rth thermal resistance 50 c/w test conditions unless otherwise noted. 1. device performance is measured on berex evaluation board at 25c, 50 ohm system 2. oip3 is measured on an eval-board with two tones separated by 1 mhz. absolute maximum ratings parameter rating operating case temperature -40 to +85 c storage temperature -55 to +155 c supply voltage 6.5v max. device current 180ma input rf power 23dbm operation of this device above any of these parameters may result in permanent damage.
berex b c t05cv http: //www.berex.com typical device data s-parameters (vc=5v, ic=87ma, t=25 c) s-parameter test circuit chip attachment on pf083
berex b c t05cv http: //www.berex.com i-v characteristics generic pf083 evaluation board (31mil thick fr4) s-parameter (5v/87ma) freq s11 s11 s12 s12 s21 s21 s22 s22 [mhz] [mag] [ang] [mag] [ang] [mag] [ang] [mag] [ang] 100 0.465 -48.427 0.010 85.919 3.827 -99.799 0.929 -153.159 500 0.645 -128.468 0.034 7.967 9.952 141.528 0.602 144.177 1000 0.690 -171.254 0.045 -48.963 8.810 48.139 0.315 148.430 1500 0.748 159.059 0.051 -102.372 6.588 -24.785 0.376 144.485 2000 0.778 141.185 0.053 -144.526 4.794 -81.488 0.455 138.017 2500 0.748 138.006 0.055 172.951 3.889 -135.293 0.418 142.841 3000 0.841 142.443 0.059 130.929 3.046 176.260 0.541 154.681 3500 0.934 139.011 0.056 84.638 2.464 127.419 0.638 149.921 4000 0.899 132.888 0.067 40.623 2.301 75.436 0.591 143.868 * note : s-parameter includes 1 mil thick and 16-mil long au wire application circuit: 900 mhz schematic diagram bom tolerance c1 100pf 5% c2 6.8pf 5% c3 100pf 5% c4 100pf 5% c5 1000pf 10% c6 10uf 10% l1 2nh 5% l2 12nh 5%
berex b c t05cv http: //www.berex.com typical performance
berex b c t05cv http: //www.berex.com application circuit: 1900 mhz schematic diagram bom tolerance c1 100pf 5% c2 2pf 5% c3 1.2pf 5% c4 100pf 5% c5 100pf 5% c6 1000pf 10% c7 10uf 10% l1 1.8nh 5% l2 6.8nh 5% typical performance
berex b c t05cv http: //www.berex.com application circuit: 2450mhz schematic diagram bom tolerance c1 1.5pf 5% c2 1.8pf 5% c3 0.8pf 5% c4 100pf 5% c5 100pf 5% c6 1000pf 10% c7 10uf 10% l1 1nh 5% l2 6.8nh 5% typical performance
berex b c t05cv http: //www.berex.com die outline notes: 1) die thickness 100um 2) bondpad metal thickness 2.8um 3) backside metal au, 5um 4) device is grounded through via holes
berex b c t05cv http: //www.berex.com esd rating esd rating value test standard class 1b passes <1000v human body model (hbm) jedec standard jesd22-a114b nato cage code: notice berex corporation reserves the right to make changes of product specification or to discontinue product at any time without notice. 2 n 9 6 f
|
